Global Academic Publishers Logo
GAP Insights · Publishing Guides · 2026

How to Write a Research Blog Post Researchers Will Read

By Muaz Dave · 17 November 2026, 7:17 AM PKT

How to Write a Research Blog Post Researchers Will Read

Introduction

Most research blog posts are never finished. Not because the research is boring, but because the post reads like a paper: a long introduction and a conclusion that arrives after the reader has left. A blog post is a different kind of writing. Its job is not to prove something. Its job is to make one person, scrolling on a phone, stop and keep reading.

Writing a readable post is a skill, not a talent. It follows a small set of decisions: pick one finding, tell it as a story, write it in plain language, give it a headline that promises something specific, and end with a reason to act. This guide works through each decision — and shows how a blog post differs from the plain-language summary and the promotion of a published paper.

A Blog Post Is Not a Paper, a Summary, or a Promotion

Three formats do different jobs. A research paper proves a claim to specialists, with methods, data, and references. A plain-language summary restates the whole paper in simple words, usually in a fixed format — see our guide on how to write a plain-language summary. A promotion tells people a paper exists and where to read it, usually in a few lines with a link — see our guide on how to promote your published research.

A blog post is none of those. It takes one finding and makes it interesting to someone who was not looking for it — a researcher in another field, a student, or a practitioner. Its job is to earn five minutes of attention, not to summarise the whole study. The test is simple: if removing a paragraph changes nothing, delete it.

Start with One Finding, Not the Whole Paper

Every paper contains several findings, but a blog post can carry only one — readers remember one idea and forget three. Before you draft, answer one question in a single sentence: what is the one thing this post is about? If you need two sentences, you have two posts.

Consider a concrete example. Ayesha, a veterinary researcher, studied mastitis treatment on 48 dairy farms around Faisalabad. Her paper reported several results, but a post covering all of them would read like an abstract. Instead she picked one: farmers who started treatment within 24 hours of the first symptoms saw visibly better recovery than farmers who waited three days. That became the post; the rest stayed in the paper, linked at the end.

Choose the finding that surprised you, or the one that changes what someone should do.

Turn the Finding into a Story

Readers remember stories; they forget lists of facts. A research blog post works best when it follows a small story: something was wrong or unknown, someone tried something, something unexpected happened, and now something should change. You do not need drama. You need a sequence a reader can follow.

Take Ayesha's finding and shape it as a story. The problem: farmers were losing milk and money because mastitis kept returning. The attempt: her team followed 48 farms and recorded exactly when treatment began. The surprise: the timing of the first dose mattered more than which medicine was used. The change: farmers who act within a day of the first symptoms see better recovery. Told in that order, the finding lands.

Your story needs three ingredients: a person or group the reader can picture, a problem that costs something real, and a turning point — the moment the data said something unexpected. If your draft has no turning point, look for the number that made you pause when you first saw it. That pause is the story.

Write the Headline After the Draft — but Make It Earn the Click

Headlines fail in two ways: some are so vague they promise nothing ("A Study of Mastitis in Dairy Cows"), and some are so exaggerated they promise what the post cannot deliver. A good headline sits between the two: it names the subject, hints at the finding, and leaves a question the reader wants answered. Write it after the draft.

Test it with three checks: does it name the subject, does it contain a specific detail — a number, a place, a group of people — and would you click it if you had never met the author? Three before-and-after pairs for the same study:

Each better version contains a concrete detail — 24 hours, 48 farms, cheapest versus best — and opens a question the reader wants closed. Keep it under twelve words, and avoid words that mean nothing on their own, such as "study" and "research."

Your First Paragraph Decides Everything

Most readers decide within seconds whether to keep reading, and they decide on the first paragraph. If it opens with background, definitions, or a literature review, they leave. If it opens with something concrete — a person, a problem, a surprising number — they stay. Put the most interesting thing first.

Compare two openings for the same post. The weak version opens with background: "Mastitis is a common disease of dairy cattle, caused by bacterial infection of the udder." The reader has learned nothing new, and nothing pulls them forward.

The strong version: "On the third day, the cow was still sick — and the farmer had already spent more on medicine than the milk was worth. Our team followed 48 dairy farms around Faisalabad, and the pattern was the same: the farmers who waited lost money, and the farmers who acted within a day did not. The drug mattered less than the clock." Same study, same facts — but the second version starts with a scene and a surprise.

Plain Language Without Dumbing the Science Down

Plain language does not mean simple science. It means explaining difficult ideas in words a reader outside your subfield can follow, without removing the difficulty itself. The most common mistake is keeping every technical term and then apologising for it. The reader does not need an apology — they need the term explained once, in one sentence, and then used normally.

Three techniques carry most of the weight. First, define a technical term the first time you use it, in plain words, and then keep using it. Write "mastitis, an infection of the udder," once, and then just say mastitis. Second, keep one idea in each sentence — a sentence with three clauses and two sets of brackets is a paragraph pretending to be a sentence. Third, prefer active verbs and concrete nouns: "farmers dosed the cows twice a day" beats "the animals were subjected to a twice-daily dosing regimen." The science is identical. The reading is not.

Read the draft aloud: if you stumble on a sentence, your reader will too. Hand it to a colleague in another field and ask them to mark every sentence they had to re-read — those marks are your editing list.

Structure That Keeps a Reader Scrolling

Blog readers scan before they read. They scroll down the page, look at the headings, and decide whether the post is worth their time. So give them headings that tell the story on their own: a reader who reads only your headings should still understand the post. "The timing mattered more than the drug" is a heading. "Results" is not.

Keep paragraphs short — three to five lines each. A wall of text on a phone screen is a reason to leave. Break the post into sections of 100 to 200 words, each with a heading that says what that section delivers, and put one idea in each section.

Length is a decision, not an accident. A post of 600 to 1,000 words is enough to explain one finding properly. If your draft runs past 1,200 words, you are covering two findings, or you have let background creep back in — cut the background first.

Visuals That Do Real Work

One good visual is worth more than three decorative ones. A blog post needs a visual that helps the reader understand the finding, not a stock photo of a laboratory. The best visual is usually the simplest version of your key result: one chart, one comparison, one photo that shows the thing you studied.

For Ayesha's mastitis post, the right visual is one bar chart with two bars: recovery when treatment began within 24 hours, and after three days. Two bars, labelled clearly, with a caption that states the finding in one sentence. A reader who looks only at the chart should still get the point. Avoid charts with five series or tiny labels — those belong in the paper.

Every visual needs a clear caption, labels a non-specialist can read, and a source note if the data came from elsewhere. Check it on a phone before you publish, and never reuse a figure from a published paper without checking who owns the rights to it.

Three Blogs That Get This Right — and What to Copy from Them

You do not need to invent the form — three established outlets show how it is done.

The Conversation publishes articles written by academics and edited by professional journalists, free to read and free to republish. Its lesson is the editor: every piece passes through an editor who cuts jargon and checks that a non-specialist can follow it. Copy this by asking one person outside your field to read your draft.

Nature's Behind the Paper channel invites researchers to tell the story behind their paper: what went wrong and what surprised them. Its lesson is the story: copy it by writing one paragraph about what surprised you — often the most-read part, because only you could have written it.

The LSE Impact Blog publishes short posts about how research reaches beyond the university. Its lesson is the audience: every post answers, in its first lines, why someone outside the author's field should care. Copy it with one sentence before you draft: "This matters to [a specific reader] because [a specific reason]."

Before You Publish: A Quick Checklist

Run through this list on the final draft, and fix anything that fails before the post goes live:

Blog Post, Plain-Language Summary, and Promotion — Side by Side

FormatJobAudienceTypical lengthTone
Research blog postMake one finding interesting to a reader who was not looking for itResearchers in other fields, students, practitioners600–1,000 wordsConversational, story-led, direct
Plain-language summaryRestate the whole paper in simple words, in a fixed formatNon-specialist readers who need the findings200–500 wordsNeutral, complete, structured
Promotion of a published paperTell people the paper exists and where to read itYour network, followers, and the fieldA few lines plus a linkBrief, direct, link-led
Research paperProve a claim to specialistsSpecialists in your field and peer reviewersSeveral thousand wordsFormal, precise, fully referenced

Further Reading and Useful Resources

These authoritative external resources explain the standards and tools mentioned in this guide:

Frequently Asked Questions

How long should a research blog post be?
Aim for 600 to 1,000 words — long enough to explain one finding properly, short enough to read in about five minutes. If your draft passes 1,200 words, you are probably covering two findings; split it into two posts. A reader who finishes the post is worth more than a reader who closes it halfway through.

Is a blog post the same as a plain-language summary?
No. A plain-language summary restates the whole paper in simple words, usually in a fixed format for a journal or funder. A blog post picks one finding, tells it as a story, and speaks to the reader directly. The summary informs; the post interests. Both use plain language, but only the blog post is written to be read for pleasure.

Can I blog about research that is not published yet?
Yes, but be careful. Blogging about unpublished work can be fine for sharing methods, fieldwork, or early ideas — many researchers do it. Do not share results you plan to submit to a journal that treats prior public posting as prior publication. Check the journal's policy first, and when in doubt, wait until the paper is accepted.

Should I write the blog post myself, or ask someone else to write it?
Write the first draft yourself. Nobody else knows what surprised you, what went wrong, or why the finding matters — and those are the parts readers remember. A colleague, editor, or communications officer can then help you cut jargon and sharpen the headline. The voice should stay yours; the polish can be shared.

Where should I publish a research blog post?
Start with your university, department, or project blog, where an editor can help and an audience already exists. You can also pitch to outlets such as The Conversation, which publishes academics with professional editing, or post on your own site and share the link. Pick one home for the post; do not publish the same text in several places.

Will blogging hurt my chances of journal publication?
Blogging about a published paper never hurts — journals welcome the attention. Blogging about unpublished results is the only real risk, and only with journals that treat public posting as prior publication. A short post about the question, the fieldwork, or the method is usually safe; full results are best shared after acceptance.

Submit your manuscript  ← Back to GAP Insights

More Resources for Researchers

Research Resources Directory

Useful publishers, databases, funders, tools and institutions for researchers:

Publishers

Databases and Indexes

Preprint Servers and Repositories

Ethics and Reporting Standards

Funders

Research Tools

Health and Veterinary Organisations

Veterinary Schools

Leading Universities

Major Journals